Send Email
Send SMS
Search
Dolphin Floats Pvt Ltd, India


Non Metallic Floor Hardener

Non Metallic Floor Hardener (DURONITE-QZ) is ideal cost effective solution for wear resistant heavy-duty industrial floors and slabs. It is made from special purpose quartz blended with specially formulated abrasion resistance enhancement material. It provides wear & abrasion resistant coat on the surface of new or existing concrete floors. It further imparts skid & slip resistance to the floor.

Non Metallic Floor Hardener

REQUEST CALLBACK

Non Metallic Floor Hardener
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 15 / KilogramGet Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
BrandDolphin Floats / Kalyan
Packaging TypeBags
Quantity Per Pack25 kg

Non Metallic Floor Hardener (DURONITE-QZ) is ideal cost effective solution for wear resistant heavy-duty industrial floors and slabs. It is made from special purpose quartz blended with specially formulated abrasion resistance enhancement material. It provides wear & abrasion resistant coat on the surface of new or existing concrete floors. It further imparts skid & slip resistance to the floor.

Typical Applications:

  • Engineering workshops / foundries
  • Railway platforms / locomotive sheds
  • Utilities areas e.g. compressor, boiler & DG rooms
  • Machine tool industries
  • Garages
  • Loading bays
  • Subways
  • Warehouses incl. agricultural applications
  • Power stations
  • Car parks

Usage:

DURONITE-QZ is ideal for concretes of grade M-20 and above. The recommended broadcast quantities are:

  • Heavy traffic: 7 kg/m2
  • Medium traffic: 5 kg/m2
  • Light traffic: 3 kg/m2

Broadcast DURONITE-QZ on fresh concrete slabs while the concrete is green but sufficiently set to take applicator weights (ideally able to limit foot impression to 3 mm depth).

  • Spray 50% of total quantity and hand trowel once the broadcast material has absorbed water from base concrete and become dark.
  • Apply balance 50% in similar manner at 90 deg to first spray.
  • Apply power float when surface sheen starts to disappear. This helps close pores & capillaries.
  • Cure using wet burlap / gunny bags.
  • Avoid any traffic till the concrete has fully set & achieved design strength.
Yes! I am Interested

Metallic Floor Hardeners

REQUEST CALLBACK

Metallic Floor Hardeners
  • Metallic Floor Hardeners
  • Metallic Floor Hardeners
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Minimum Order Quantity100 Kilogram
ApplicationIndustrial Use, Slabs
Pack Size25 kg
BrandDolphin Floats / Kalyan
Packaging TypeBags

Metallic Floor Hardener (DURONITE) is ideal cost effective wear resistant top coat for heavy duty industrial floors / slabs. This is well graded, rust resistant ferrous aggregate available in two grades: DURONITE(R) & DURONITE(S). Typical areas of application: Engineering workshops / foundries Railway platforms / locomotive sheds Utilities areas e.g. compressor, boiler & DG rooms Machine tool industries Garages Loading bays Subways Warehouses incl. agricultural applications Power stations Car parks Usage: Special grade: 3-7 kg/m 2 Regular grade: 4-8 kg/m 2 These should not be used in floors that are exposed to strong inorganic acids, their salts and liquid spillages. Application on freshly laid concrete floors: Broadcast DURONITE on fresh concrete slabs while the concrete is green but sufficiently set to take applicator weights (ideally able to limit foot impression to 3 mm depth). This should be done immediately after bleed water has evaporated. Spray 50% of total quantity & hand trowel. Spray the balance 50% at 90 Deg to first spray & hand trowel. Apply power float when surface sheen starts to disappear. This helps close pores & capillaries. Cure using wet burlap / gunny bags. Avoid any traffic till the concrete has fully set & achieved design strength. Application as granolithic topping on existing floors: In this case a top screed of 12-50 mm is required on existing floor. Typical mix design is DURONITE 50kg : Cement 200kg : Grit (3-6 mm) 600kg. Super-plasticisers to be used. W:C ratio to be 0.38-0.42. However this needs to be confirmed by structural designers. Use of PP fibres (STRONGPLAST / NOKRACK) @ 125 gm / 50 kg cement would give additional crack & impact resistance.
Yes! I am Interested

 
X


Explore More Products

Contact via E-mail
Contact via SMS
Dolphin Floats Pvt Ltd, India
Alok Telang (Manager)
EL-25/5, First And Second Floor MIDC, Bhosari,
Pune - 411026, Maharashtra, India
Call Us: 
Call Response Rate: 87%
Share Us :
F G T L



Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

© Dolphin Floats Pvt Ltd, India. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Dolphin Floats Pvt Ltd, India